DV800 Series
Front Matter
1 Important Safeguards
1.1 General Precautions
1.2 Installation
1.3 Service
1.4 Use
2 Getting Started (DV800 Series)
3 Front Panel (DV800 Series)
4 Rear Panel (DV800 Series)
5 Basic Setup (DV800 Series)
5.1 Step 1: Connect the BNC Cameras
5.2 Step 2: Connect the Mouse
5.3 Step 3: Connect the Ethernet Cable
5.4 Step 4: Connect the Monitor
5.5 Step 5: Connect the Power Adapter and Power on the DVR
5.6 Step 6: Creating a New, Secure Password
5.7 Step 7: Upgrade Firmware to Latest Version (if Available)
5.8 Step 8: Verify Camera Image
5.9 Step 9: Set the Time
5.10 Default System Password & Port Numbers
5.10.1 FLIR Cloud™
5.11 Quick Access to System Information
6 About MPX
6.1 What types of cabling and run lengths does MPX work with?
7 Mouse Control
8 Remote Control
8.1 Setting the Remote Control Address
9 Using the System
9.1 On-Screen Display
9.2 Using the Quick Menu
9.3 Adjusting Camera Settings
9.4 Using the Navigation Bar
9.5 Using the Camera Toolbar
9.5.1 Using Instant Playback
9.5.2 Using Digital Zoom in Live Display
9.5.3 Using Real-time Backup
9.6 Using the Virtual Keyboard
10 Setting The Time
11 Recording
11.1 Video Recording Types
11.2 Main Stream and Sub Stream
11.3 Setting up Scheduled or Manual Recording
11.4 Configuring Hard Drive Overwrite
12 Playback
12.1 Playing Back Video from the Hard Drive
12.2 Playback Controls
12.3 Playing Back from a USB Drive
12.4 Using Smart Search
13 Backup
13.1 Formatting the USB Thumb Drive
13.2 Backing up Video
13.3 Using Video Clip Backup
13.4 Viewing Backup Files
13.4.1 Viewing Backup Files on PC
13.4.2 Viewing Backup Files on Mac
14 Managing Passwords and User Accounts
14.1 Changing Passwords
14.2 Adding Users
14.3 Modifying Users
14.4 Deleting Users
14.5 Account Groups
14.6 Adding Groups
14.7 Modifying Groups
14.8 Deleting Groups
15 Using the Main Menu
15.1 Camera
15.1.1 Recording
15.1.2 Configuring Recording Quality
15.1.3 Configuring Audio Recording
15.1.4 Configuring Snapshot Recording Settings
15.1.5 Configuring Video Overlay Settings
15.1.6 Creating Custom Channel Names
15.1.7 Adding a Remote Device
15.1.8 Selecting Cable Type
15.1.9 Upgrading Camera Firmware (Advanced)
15.2 Info
15.2.1 HDD Info
15.2.2 Record Info
15.2.3 Version
15.2.4 Alarm Status
15.2.5 Online Users
15.2.6 Load
15.2.7 Test
15.2.8 BPS
15.2.9 Log
15.3 Setting
15.3.1 Network
15.3.2 Selecting DHCP or Static IP Address (TCP/IP)
15.3.3 Configuring System Ports (Connection)
15.3.4 Configuring DDNS Settings
15.3.5 Configuring Email Alerts
15.3.6 Event
15.3.7 Configuring Motion Detection
15.3.8 Configuring Video Loss Settings
15.3.9 Configuring Tamper Detection
15.3.10 Configuring Hard Drive Warnings
15.3.11 Configuring Network Warnings
15.3.12 Storage
15.3.13 Configuring the Video Recording Schedule
15.3.14 Configuring Pre-Recording
15.3.15 Configuring the Snapshot Schedule
15.3.16 Configuring Holidays
15.3.17 Formatting the Hard Drive
15.3.18 Configuring Hard Drive Type
15.3.19 Configuring General System Settings
15.3.20 Setting the Monitor Resolution (Display)
15.3.21 Saving Your System Configuration to a USB Thumb Drive
15.3.22 Setting the System to Factory Defaults
15.3.23 Upgrading Firmware from USB
15.4 Shutdown
16 Connecting to Your System Over the Internet on PC or Mac
16.1 System Requirements
16.2 Step 1 of 3: Connect your System to Your Router
16.3 Step 2 of 3: Obtain the system’s Device ID
16.4 Step 3 of 3: Connect to the System Over the Internet
17 Using FLIR Cloud™ Client for PC or Mac
17.1 Home Page
17.2 Live View
17.2.1 Live View Controls
17.2.2 Opening Live View in Multiple Monitors
17.3 Controlling PTZ Cameras
17.3.1 PTZ Presets
17.3.2 PTZ Tours
17.3.3 PTZ Pattern
17.3.4 PTZ Scan
17.3.5 PTZ Pan
17.4 Playback
17.5 Playback Controls
17.6 Downloading Video to your Computer Hard Drive
17.7 Alarm
17.8 Log
17.9 E-map
17.10 Devices
17.11 Device Config
17.12 Alarm CFG
17.13 Tour & Task
17.14 Account
17.14.1 Managing User Accounts
17.14.2 Managing Roles
17.15 General
17.15.1 Basic
17.15.2 File
17.15.3 Alarm Prompt
17.15.4 Version
18 Connecting to Your System Using Smartphone or Tablet Apps
18.1 iPhone / iPad
18.1.1 Prerequisites
18.1.2 Connecting to your System on iPhone / iPad
18.1.3 Live View Interface
18.1.4 Controlling PTZ Cameras
18.1.5 Viewing Snapshots and Videos with Local Files
18.1.6 Using Playback Mode on iPhone / iPad
18.1.7 Enabling Push Notifications
18.1.8 Using the Event List
18.1.9 Using Favorites
18.1.10 Using the E-Map
18.1.11 Device Manager
18.1.12 Adding Devices Using an IP or DDNS Address (Advanced)
18.2 Android
18.2.1 Prerequisites
18.2.2 Connecting to your System on Android
18.2.3 Live View Interface
18.2.4 Controlling PTZ Cameras
18.2.5 Viewing Snapshots and Videos with Local Files
18.2.6 Using Playback Mode on Android
18.2.7 Enabling Push Notifications
18.2.8 Using the Event List
18.2.9 Using Favorites
18.2.10 Using the E-Map
18.2.11 Device Manager
18.2.12 Adding Devices Using an IP or DDNS Address (Advanced)
19 DDNS Setup (Advanced)
19.1 Accessing your System within a Local Network (LAN)
19.1.1 Step 1 of 3: Connect your System to Your Router
19.1.2 Step 2 of 3: Obtain the System’s Local IP Address
19.1.3 Step 3 of 3: Connect to the System’s Local IP Address
19.2 DDNS Setup—Access your System Remotely over the Internet
19.2.1 Step 1 of 4: Port Forwarding
19.2.2 Step 2 of 4: Create a DDNS Account
19.2.3 Step 3 of 4: Enable DDNS on the System
19.2.4 Step 4 of 4: Connect to the System’s DDNS Address
20 RTSP Streaming (Advanced)
21 Connecting a PTZ Camera (DV800 Series)
21.1 Controlling a PTZ Camera (Local DVR)
21.2 Advanced PTZ Controls
21.2.1 Presets
21.2.2 Tours
21.2.3 Pattern
21.2.4 Auto Scan
22 Connecting Cameras to the Local Area Network (LAN)
23 DV800 Series Hard Drive Installation
23.1 Installing a Hard Drive
23.2 Removing the Hard Drive
23.3 Formatting Hard Drives
24 Troubleshooting
25 DV800 Series System Specifications
26 Notices
26.1 FCC/IC Notice
26.2 Modification
26.3 ROHS
Document
Front Matter
1 Important Safeguards
2 Getting Started (DV800 Series)
3 Front Panel (DV800 Series)
4 Rear Panel (DV800 Series)
5 Basic Setup (DV800 Series)
6 About MPX
7 Mouse Control
8 Remote Control
9 Using the System
10 Setting The Time
11 Recording
12 Playback
13 Backup
14 Managing Passwords and User Accounts
15 Using the Main Menu
16 Connecting to Your System Over the Internet on PC or Mac
17 Using FLIR Cloud™ Client for PC or Mac
18 Connecting to Your System Using Smartphone or Tablet Apps
19 DDNS Setup (Advanced)
20 RTSP Streaming (Advanced)
21 Connecting a PTZ Camera (DV800 Series)
22 Connecting Cameras to the Local Area Network (LAN)
23 DV800 Series Hard Drive Installation
24 Troubleshooting
25 DV800 Series System Specifications
26 Notices
Chapter
1.1 General Precautions
1.2 Installation
1.3 Service
1.4 Use
5.1 Step 1: Connect the BNC Cameras
5.2 Step 2: Connect the Mouse
5.3 Step 3: Connect the Ethernet Cable
5.4 Step 4: Connect the Monitor
5.5 Step 5: Connect the Power Adapter and Power on the DVR
5.6 Step 6: Creating a New, Secure Password
5.7 Step 7: Upgrade Firmware to Latest Version (if Available)
5.8 Step 8: Verify Camera Image
5.9 Step 9: Set the Time
5.10 Default System Password & Port Numbers
5.11 Quick Access to System Information
6.1 What types of cabling and run lengths does MPX work with?
8.1 Setting the Remote Control Address
9.1 On-Screen Display
9.2 Using the Quick Menu
9.3 Adjusting Camera Settings
9.4 Using the Navigation Bar
9.5 Using the Camera Toolbar
9.6 Using the Virtual Keyboard
11.1 Video Recording Types
11.2 Main Stream and Sub Stream
11.3 Setting up Scheduled or Manual Recording
11.4 Configuring Hard Drive Overwrite
12.1 Playing Back Video from the Hard Drive
12.2 Playback Controls
12.3 Playing Back from a USB Drive
12.4 Using Smart Search
13.1 Formatting the USB Thumb Drive
13.2 Backing up Video
13.3 Using Video Clip Backup
13.4 Viewing Backup Files
14.1 Changing Passwords
14.2 Adding Users
14.3 Modifying Users
14.4 Deleting Users
14.5 Account Groups
14.6 Adding Groups
14.7 Modifying Groups
14.8 Deleting Groups
15.1 Camera
15.2 Info
15.3 Setting
15.4 Shutdown
16.1 System Requirements
16.2 Step 1 of 3: Connect your System to Your Router
16.3 Step 2 of 3: Obtain the system’s Device ID
16.4 Step 3 of 3: Connect to the System Over the Internet
17.1 Home Page
17.2 Live View
17.3 Controlling PTZ Cameras
17.4 Playback
17.5 Playback Controls
17.6 Downloading Video to your Computer Hard Drive
17.7 Alarm
17.8 Log
17.9 E-map
17.10 Devices
17.11 Device Config
17.12 Alarm CFG
17.13 Tour & Task
17.14 Account
17.15 General
18.1 iPhone / iPad
18.2 Android
19.1 Accessing your System within a Local Network (LAN)
19.2 DDNS Setup—Access your System Remotely over the Internet
21.1 Controlling a PTZ Camera (Local DVR)
21.2 Advanced PTZ Controls
23.1 Installing a Hard Drive
23.2 Removing the Hard Drive
23.3 Formatting Hard Drives
26.1 FCC/IC Notice
26.2 Modification
26.3 ROHS
Topic
5.10.1 FLIR Cloud™
9.5.1 Using Instant Playback
9.5.2 Using Digital Zoom in Live Display
9.5.3 Using Real-time Backup
13.4.1 Viewing Backup Files on PC
13.4.2 Viewing Backup Files on Mac
15.1.1 Recording
15.1.2 Configuring Recording Quality
15.1.3 Configuring Audio Recording
15.1.4 Configuring Snapshot Recording Settings
15.1.5 Configuring Video Overlay Settings
15.1.6 Creating Custom Channel Names
15.1.7 Adding a Remote Device
15.1.8 Selecting Cable Type
15.1.9 Upgrading Camera Firmware (Advanced)
15.2.1 HDD Info
15.2.2 Record Info
15.2.3 Version
15.2.4 Alarm Status
15.2.5 Online Users
15.2.6 Load
15.2.7 Test
15.2.8 BPS
15.2.9 Log
15.3.1 Network
15.3.2 Selecting DHCP or Static IP Address (TCP/IP)
15.3.3 Configuring System Ports (Connection)
15.3.4 Configuring DDNS Settings
15.3.5 Configuring Email Alerts
15.3.6 Event
15.3.7 Configuring Motion Detection
15.3.8 Configuring Video Loss Settings
15.3.9 Configuring Tamper Detection
15.3.10 Configuring Hard Drive Warnings
15.3.11 Configuring Network Warnings
15.3.12 Storage
15.3.13 Configuring the Video Recording Schedule
15.3.14 Configuring Pre-Recording
15.3.15 Configuring the Snapshot Schedule
15.3.16 Configuring Holidays
15.3.17 Formatting the Hard Drive
15.3.18 Configuring Hard Drive Type
15.3.19 Configuring General System Settings
15.3.20 Setting the Monitor Resolution (Display)
15.3.21 Saving Your System Configuration to a USB Thumb Drive
15.3.22 Setting the System to Factory Defaults
15.3.23 Upgrading Firmware from USB
17.2.1 Live View Controls
17.2.2 Opening Live View in Multiple Monitors
17.3.1 PTZ Presets
17.3.2 PTZ Tours
17.3.3 PTZ Pattern
17.3.4 PTZ Scan
17.3.5 PTZ Pan
17.14.1 Managing User Accounts
17.14.2 Managing Roles
17.15.1 Basic
17.15.2 File
17.15.3 Alarm Prompt
17.15.4 Version
18.1.1 Prerequisites
18.1.2 Connecting to your System on iPhone / iPad
18.1.3 Live View Interface
18.1.4 Controlling PTZ Cameras
18.1.5 Viewing Snapshots and Videos with Local Files
18.1.6 Using Playback Mode on iPhone / iPad
18.1.7 Enabling Push Notifications
18.1.8 Using the Event List
18.1.9 Using Favorites
18.1.10 Using the E-Map
18.1.11 Device Manager
18.1.12 Adding Devices Using an IP or DDNS Address (Advanced)
18.2.1 Prerequisites
18.2.2 Connecting to your System on Android
18.2.3 Live View Interface
18.2.4 Controlling PTZ Cameras
18.2.5 Viewing Snapshots and Videos with Local Files
18.2.6 Using Playback Mode on Android
18.2.7 Enabling Push Notifications
18.2.8 Using the Event List
18.2.9 Using Favorites
18.2.10 Using the E-Map
18.2.11 Device Manager
18.2.12 Adding Devices Using an IP or DDNS Address (Advanced)
19.1.1 Step 1 of 3: Connect your System to Your Router
19.1.2 Step 2 of 3: Obtain the System’s Local IP Address
19.1.3 Step 3 of 3: Connect to the System’s Local IP Address
19.2.1 Step 1 of 4: Port Forwarding
19.2.2 Step 2 of 4: Create a DDNS Account
19.2.3 Step 3 of 4: Enable DDNS on the System
19.2.4 Step 4 of 4: Connect to the System’s DDNS Address
21.2.1 Presets
21.2.2 Tours
21.2.3 Pattern
21.2.4 Auto Scan